Configuring Monitor/OSD Interaction¶

After you have completed your initial Ceph configuration, you may deploy and run Ceph. When you execute a command such as ceph health or ceph -s, the Ceph Monitor reports on the current state of the Ceph Storage Cluster. The Ceph Monitor knows about the Ceph Storage Cluster by requiring reports from each Ceph OSD Daemon, and by receiving reports from Ceph OSD Daemons about the status of their neighboring Ceph OSD Daemons. If the Ceph Monitor doesn’t receive reports, or if it receives reports of changes in the Ceph Storage Cluster, the Ceph Monitor updates the status of the Ceph Cluster Map.

Ceph provides reasonable default settings for Ceph Monitor/Ceph OSD Daemon interaction. However, you may override the defaults. The following sections describe how Ceph Monitors and Ceph OSD Daemons interact for the purposes of monitoring the Ceph Storage Cluster.

OSDs Check Heartbeats¶

Each Ceph OSD Daemon checks the heartbeat of other Ceph OSD Daemons every 6 seconds. You can change the heartbeat interval by adding an osd heartbeat interval setting under the [osd] section of your Ceph configuration file, or by setting the value at runtime. If a neighboring Ceph OSD Daemon doesn’t show a heartbeat within a 20 second grace period, the Ceph OSD Daemon may consider the neighboring Ceph OSD Daemon down and report it back to a Ceph Monitor, which will update the Ceph Cluster Map. You may change this grace period by adding an osd heartbeat grace setting under the [osd] section of your Ceph configuration file, or by setting the value at runtime.

../../_images/ditaa-5a945c0c556a3d360f37fbbbcf8358133d7d97a6.png

OSDs Report Down OSDs¶

By default, a Ceph OSD Daemon must report to the Ceph Monitors that another Ceph OSD Daemon is down three times before the Ceph Monitors acknowledge that the reported Ceph OSD Daemon is down. You can change the minimum number of osd down reports by adding an mon osd min down reports setting (osd min down reports prior to v0.62) under the [mon] section of your Ceph configuration file, or by setting the value at runtime. By default, only one Ceph OSD Daemon is required to report another Ceph OSD Daemon down. You can change the number of Ceph OSD Daemones required to report a Ceph OSD Daemon down to a Ceph Monitor by adding an mon osd min down reporters setting (osd min down reporters prior to v0.62) under the [mon] section of your Ceph configuration file, or by setting the value at runtime.

../../_images/ditaa-55e24e1da7b07885b6804dd7b3f7c804df1f51b6.png

OSDs Report Peering Failure¶

If a Ceph OSD Daemon cannot peer with any of the Ceph OSD Daemons defined in its Ceph configuration file (or the cluster map), it will ping a Ceph Monitor for the most recent copy of the cluster map every 30 seconds. You can change the Ceph Monitor heartbeat interval by adding an osd mon heartbeat interval setting under the [osd] section of your Ceph configuration file, or by setting the value at runtime.

../../_images/ditaa-f72f0ecc1d3d44a4d80ac22e26c8142c7226f041.png

OSDs Report Their Status¶

If an Ceph OSD Daemon doesn’t report to a Ceph Monitor, the Ceph Monitor will consider the Ceph OSD Daemon down after the mon osd report timeout elapses. A Ceph OSD Daemon sends a report to a Ceph Monitor when a reportable event such as a failure, a change in placement group stats, a change in up_thru or when it boots within 5 seconds. You can change the Ceph OSD Daemon minimum report interval by adding an osd mon report interval min setting under the [osd] section of your Ceph configuration file, or by setting the value at runtime. A Ceph OSD Daemon sends a report to a Ceph Monitor every 120 seconds irrespective of whether any notable changes occur. You can change the Ceph Monitor report interval by adding an osd mon report interval max setting under the [osd] section of your Ceph configuration file, or by setting the value at runtime.

../../_images/ditaa-854448a27930dcf5aaf27b58a65ae033101516d6.png

Configuration Settings¶

When modifying heartbeat settings, you should include them in the [global] section of your configuration file.

Monitor Settings¶

mon osd min up ratio

Description: The minimum ratio of up Ceph OSD Daemons before Ceph will mark Ceph OSD Daemons down.
Type: Double
Default: .3

mon osd min in ratio

Description: The minimum ratio of in Ceph OSD Daemons before Ceph will mark Ceph OSD Daemons out.
Type: Double
Default: .75

mon osd laggy halflife

Description: The number of seconds laggy estimates will decay.
Type: Integer
Default: 60*60

mon osd laggy weight

Description: The weight for new samples in laggy estimation decay.
Type: Double
Default: 0.3

mon osd adjust heartbeat grace

Description: If set to true, Ceph will scale based on laggy estimations.
Type: Boolean
Default: true

mon osd adjust down out interval

Description: If set to true, Ceph will scaled based on laggy estimations.
Type: Boolean
Default: true

mon osd auto mark in

Description: Ceph will mark any booting Ceph OSD Daemons as in the Ceph Storage Cluster.
Type: Boolean
Default: false

mon osd auto mark auto out in

Description: Ceph will mark booting Ceph OSD Daemons auto marked out of the Ceph Storage Cluster as in the cluster.
Type: Boolean
Default: true

mon osd auto mark new in

Description: Ceph will mark booting new Ceph OSD Daemons as in the Ceph Storage Cluster.
Type: Boolean
Default: true

mon osd down out interval

Description: The number of seconds Ceph waits before marking a Ceph OSD Daemon down and out if it doesn’t respond.
Type: 32-bit Integer
Default: 300

mon osd down out subtree limit

Description: The smallest CRUSH unit type that Ceph will not automatically mark out. For instance, if set to host and if all OSDs of a host are down, Ceph will not automatically mark out these OSDs.
Type: String
Default: rack

mon osd report timeout

Description: The grace period in seconds before declaring unresponsive Ceph OSD Daemons down.
Type: 32-bit Integer
Default: 900

mon osd min down reporters

Description: The minimum number of Ceph OSD Daemons required to report a down Ceph OSD Daemon.
Type: 32-bit Integer
Default: 1

mon osd min down reports

Description: The minimum number of times a Ceph OSD Daemon must report that another Ceph OSD Daemon is down.
Type: 32-bit Integer
Default: 3

OSD Settings¶

osd heartbeat address

Description: An Ceph OSD Daemon’s network address for heartbeats.
Type: Address
Default: The host address.

osd heartbeat interval

Description: How often an Ceph OSD Daemon pings its peers (in seconds).
Type: 32-bit Integer
Default: 6

osd heartbeat grace

Description: The elapsed time when a Ceph OSD Daemon hasn’t shown a heartbeat that the Ceph Storage Cluster considers it down.
Type: 32-bit Integer
Default: 20

osd mon heartbeat interval

Description: How often the Ceph OSD Daemon pings a Ceph Monitor if it has no Ceph OSD Daemon peers.
Type: 32-bit Integer
Default: 30

osd mon report interval max

Description: The maximum time in seconds that a Ceph OSD Daemon can wait before it must report to a Ceph Monitor.
Type: 32-bit Integer
Default: 120

osd mon report interval min

Description: The minimum number of seconds a Ceph OSD Daemon may wait from startup or another reportable event before reporting to a Ceph Monitor.
Type: 32-bit Integer
Default: 5
Valid Range: Should be less than osd mon report interval max

osd mon ack timeout

Description: The number of seconds to wait for a Ceph Monitor to acknowledge a request for statistics.
Type: 32-bit Integer
Default: 30